Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,245 Posts
I have had very good success machining these heads into a closed chamber design. Although this increases the compression ratio the engine becomes more detonation resistant due to the tighter squish. This is with flat top pistons though, some K.B's are a step head design in an attempt to accomplish the same thing. Although most prefer roller rockers the originals are so light they will out rev the rollers.

Thanks
Randy
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top