Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,291 Posts
Bob; I've had good luck using the thin teflon tape over the years. On 1/8" NPT brass fittings the shiny brass is still visible on the threads after tightening and removing. So I strip off the old tape and put on new. And on water systems, it aids in removal after several years.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top