Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,386 Posts
If your vehicle is equipped with the 2.0 liter 4 cylinder engine, it is relatively easy.

Place front wheels on ramps to give plenty of access under the engine. Drain engine oil and remove oil filter. You do not need to remove the oil filter adapter. Remove the structural collar that attaches to the oil pan and bell housing. Remove the access panel under the engine and expose the flywheel. You do not need to remove the support bracket to the intake manifold. Remove 13 oil pan bolts.

Reverse the order for reassembly. Oil pan bolt torque is 105 inch - lbs.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top