Allpar Forums banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
40,286 Posts
I've never replaced the hinge pins, but had to remove a door on the 94 LeBaron because it sagged (actually the sheet metal split around the hinge). I just drove the pins out (I ended up using an odd assortment of socket extensions, long screwdrivers and other things to tap the pins out) and removed the door after disconnecting all the wiring. Once I had the door welded, I put the pins back in and the alignment was perfect. No adjustments to worry about.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top