Allpar Forums banner

21 - 23 of 23 Posts

·
Registered
Joined
·
2 Posts
Hi, if you replace the module in the dash, do you need to reprogram it to match your existing remotes? If so, is there a procedure somewhere?
Thanks,
John
 

·
Super Moderator
Joined
·
21,400 Posts
Welcome to Allpar. If the ARKEM module is replaced, it will need the dealer DRB III to configure and program it to your transmitters.


NOTE: When replacing a faulty RKE Module, the
replacement module must be configured with the
DRB lll scan tool for proper operation. Refer to
Vehicle Theft/Security Systems, Switching Operat-
ing Modes/Configuring a New Module under Service
Procedures. Additionally, all transmitters must be
reprogrammed to the new RKE module.
 
21 - 23 of 23 Posts
Top