Recently replaced the rear bearings on my 93 Sundance. The race on the outside of my one hubs is no longer tight. Looking for one hub.
Thanks!
Thanks!
1966 Crown Coupe, 2016 200 S AWD, 1962 Lark Daytona V8.
Joined
·
17,617 Posts
The hub was generally serviced with the drum, although the 2 parts could be separated.
On rear disc brakes, the hub could be serviced separately from the rotor.
Both use the same inner & outer bearings, but I don't believe that the hubs are the same.
The same rear drum/hub (4383655) was used for many years and in many of the EEK cars.
Find an EEK that hasn't been through the crusher yet?
![Font Parallel Slope Pattern Circle]()
![Font Parallel Pattern Rectangle Drawing]()
On rear disc brakes, the hub could be serviced separately from the rotor.
Both use the same inner & outer bearings, but I don't believe that the hubs are the same.
The same rear drum/hub (4383655) was used for many years and in many of the EEK cars.
Find an EEK that hasn't been through the crusher yet?
Joined
·
45 Posts
Thanks, Bob,
After browsing the forum and parts sources, I have come to the same realization, find an EEK that hasn’t met it’s fate. Figured it may be easier to find one here. Lord knows I probably had one a decade ago when I had a parts Daytona in the backyard for my trans swap. Should have saved more parts. Guess I never thought I’d end up owning another EEK!
After browsing the forum and parts sources, I have come to the same realization, find an EEK that hasn’t met it’s fate. Figured it may be easier to find one here. Lord knows I probably had one a decade ago when I had a parts Daytona in the backyard for my trans swap. Should have saved more parts. Guess I never thought I’d end up owning another EEK!
Joined
·
286 Posts
1 - 4 of 4 Posts
Join the discussion
