Allpar Forums banner

front caliper hose replacement grancaravan 96

1839 Views 11 Replies 5 Participants Last post by  bastart
G
front caliper hose replacement is the next step, did the caliper and still have intermittent cling on driver side front.
Is this a straight forward swap out does anyone know what to look for whether it has a trick or two involved?
I found the hose online and also wonder if there are any parts left out doing this beyond fluid of course and the two washes shipped with.
Thanks in advance,
1 - 1 of 1 Posts

· Registered
Joined
·
430 Posts
I had both calipers refuse to release on my '88 about ten years ago. One side got so hot it melted a hubcap!

Turned out that the pistons in the originals were a composit and would swell over the years until they didn't move freely. Installed new calipers which have metal pistons and have had no further problems.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top