Joined
·
69 Posts
I'm repairing front end damage on my '10 Sebring. These are hanging loose in with the headlight and other wiring. What are they. They appear to mount some where near the radiator support?
Front end wiring
1 - 2 of 2 Posts
1966 Crown Coupe, 2016 200 S AWD, 1962 Lark Daytona V8.
Joined
·
17,587 Posts
The yellow connectors indicate that they are Passive Restraint components.
Impact sensors should be replaced if the Airbags were deployed.
They attach to the radiator core support with a single bolt. Torque the new (included) bolt. Observe the correct sensor orientation, there should be an 'up' or 'fwd' arrow & a locating pin.
You will need a scan tool. Service only with the neg (-) battery terminal disconnected. Do not allow anyone inside the car when reattaching the battery terminal.
![Font Screenshot Parallel Document Rectangle]()
![Font Number]()
![Sleeve Font Elbow Parallel Slope]()
![Font Parallel Auto part]()
![Font Number Document Screenshot Circle]()
![Font Engineering Gas Electric blue Circuit component]()
Impact sensors should be replaced if the Airbags were deployed.
They attach to the radiator core support with a single bolt. Torque the new (included) bolt. Observe the correct sensor orientation, there should be an 'up' or 'fwd' arrow & a locating pin.
You will need a scan tool. Service only with the neg (-) battery terminal disconnected. Do not allow anyone inside the car when reattaching the battery terminal.
1 - 2 of 2 Posts
