Allpar Forums banner

Help on building V8 Dakota!

8K views 6 replies 4 participants last post by  dana44 
#1 ·
I have an 01 Dakota with a 3.9 v6. I know a 318 and 360 will bolt up to the trans. Question....Will the 5.7 Hemi bolt up? I also know that engine mounts would have to be made. If it's too much work, I will probably just go with a 360. Any advice or answers would be much appreciated. Thanks!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top