Allpar Forums banner
1 - 1 of 1 Posts

· Registered
70 Posts
Discussion Starter · #1 ·
Unless its somewhere in the service manual and I missed it is there any source/diagram that can identify the type of brake line fittings on a 2002 Ram 1500 ? with 2 wheel ABS. For every other chrysler vehicle past and present we have ever owned the thoughtful people who wrote the FSM have always included a nice simple line drawing of the brake plumbing and the corresponding type of flare at each location and the identification of the threading such as whether its metric or standard SAE.

Being an 02 and looking at the replacement rubber hoses listed online they identify bubble/ISO flares and metric threading on the hoses so I would assume the rest of the system is similar but then again I know from past experiance that some vehicles use a mixture of standard 45* double flares and threaded fittings along with bubble flares and metric threaded fittings.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.