Allpar Forums banner
1 - 1 of 5 Posts

· Super Moderator
21,730 Posts
dartndodge said:
I thought about putting a van 3.3 in a Valiant, until a little research revealed that, apparently, the 3.3 van engine is a unique Van Only setup, that can only bolt up to the FWD van transmission, and has no relation to any RWD trans or bellhousing patterns like a 904/727/998 etc etc.
There is one RWD setup similar to the 3.3. That would be the 3.5 RWD setup in the Prowler which placed a driveshaft between the engine and the rear mounted transaxle.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.