Allpar Forums banner

K-member swap

1976 Views 4 Replies 4 Participants Last post by  KOG
Does any one know if a 1972 A-body K-member will fit into a 1975 valiant?
Before I start to remove the existing slant 6 member, I would like to make sure that the v-8 member will fit.
Everything looks compatible except the sway bar. The sway bar passes through the slant 6 k- member, but there are no holes in the 1972 v-8 member.
1 - 1 of 1 Posts

1,914 Posts
V8 sway bar goes trough the K member. Not a problem, you're going to want a larger one anyway.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.