Allpar Forums banner

K-member swap

1956 4
Does any one know if a 1972 A-body K-member will fit into a 1975 valiant?
Before I start to remove the existing slant 6 member, I would like to make sure that the v-8 member will fit.
Everything looks compatible except the sway bar. The sway bar passes through the slant 6 k- member, but there are no holes in the 1972 v-8 member.
1 - 2 of 2 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top