Guys, I’m having issues with my 2013 Durango V6.
The car goes into limp mode and throws several codes – not all of them at once, they seem to be random. The dealership does not know what the problem is.
I already replaced most of the sensors that use 5V reference signal (camshaft, crankshaft, TPS, MAP. accelerator) and changed the alternator and the PCM. Please help!!
P1628 - SENSOR REFERENCE VOLTAGE 2 CIRCUIT ERRATIC
P0369 - Camshaft Position Sensor 2 Circuit Intermittent Bank 1
P0344 - Camshaft Position Sensor Circuit Intermittent
P2803 –
P0129 - Barometric Pressure Out-Of-Range Low (MAP sensor signal wire is below 2.28v)
P0652-SENSOR REFERENCE VOLTAGE 2 CIRCUIT LOW - One of the 5 volt references is too low.
P2127-ACCELERATOR PEDAL POSITION SENSOR 2 CIRCUIT LOW
P0652 - 5 Volt Sensor Reference 2 Circuit Low
P0394 - Camshaft Position Sensor Intermittent - Bank 2 Sensor 2
P0123 – throttle position sensor circuit high
P0118 - engine coolant temperature sensor circuit high
P0198 - engine oil temperature sensor high
The car goes into limp mode and throws several codes – not all of them at once, they seem to be random. The dealership does not know what the problem is.
I already replaced most of the sensors that use 5V reference signal (camshaft, crankshaft, TPS, MAP. accelerator) and changed the alternator and the PCM. Please help!!
P1628 - SENSOR REFERENCE VOLTAGE 2 CIRCUIT ERRATIC
P0369 - Camshaft Position Sensor 2 Circuit Intermittent Bank 1
P0344 - Camshaft Position Sensor Circuit Intermittent
P2803 –
P0129 - Barometric Pressure Out-Of-Range Low (MAP sensor signal wire is below 2.28v)
P0652-SENSOR REFERENCE VOLTAGE 2 CIRCUIT LOW - One of the 5 volt references is too low.
P2127-ACCELERATOR PEDAL POSITION SENSOR 2 CIRCUIT LOW
P0652 - 5 Volt Sensor Reference 2 Circuit Low
P0394 - Camshaft Position Sensor Intermittent - Bank 2 Sensor 2
P0123 – throttle position sensor circuit high
P0118 - engine coolant temperature sensor circuit high
P0198 - engine oil temperature sensor high
. . . .
