Allpar Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi guys!I have a 94 1500 318w/egr and bought a 97 318w/o egr and the ? i have can i get away with out swaping intakes and run with out the egr and if possible what vacume diagram would i use.I also plan on rebuilding the 94 block with a little extra horsepower,now I am new to mopar so all the help I can get will help!
 

·
Super Moderator
Joined
·
31,981 Posts
Welcome to Allpar.

Running without the expected EGR valve will cause the computer to store a code 32 and trip the Check Engine light. Operationally this is not a problem, but you don't want that light on all the time, and some states will fail you at inspection for it. I don't know of a way to fool it into submission, so you might want to swap the intake over and connect an EGR.
 

·
Super Moderator
Joined
·
21,351 Posts
'94 is an OBD I and '97 is an OBD II. I suspect that PCM, wiring and sensors will all be different.
Is the '97 truck still availible for parts?
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
ok i'm ok on the check engine light and on obd so far all the sensors and wiring are the same and no i got the motor from flordia and i live in texas anything else that I should be worried about?
 
1 - 4 of 4 Posts
Top