Allpar Forums banner

MyGIG Radio (REN): LCD Ribbon Cable?

3948 Views 1 Reply 2 Participants Last post by  ImperialCrown
Hey guys/gals,

So... long story short, I broke the LCD ribbon cable :facepalm:(26 conductor I think) that connects the LCD touchscreen to the main board on my MyGIG REN (2008 Jeep Grand Cherokee).

I've looked high and low through Google, can't seem to find any spare parts like this. :pullhair: Short of buying an ENTIRE used unit ($250-400) off of ebay and taking it's ribbon cable, I don't have any prospects of fixing this problem. Repairing the cable is out of the question (lots of time, lack of optical equipment, questionable reliability...)

Anyone have any ideas/parts sources?
1 - 2 of 2 Posts

· Super Moderator
1966 Crown Coupe, 2016 200 S AWD, 1962 Lark Daytona V8.
17,289 Posts
Welcome to Allpar. The MyGig is made for Chrysler by Becker. An authorized Becker service center might be able to help you. I am unfamiliar with their customer service/parts ordering policy. Get any numbers together that might help with the identification and ordering process.

You might try United Radio also. They handle the work for our local Chrysler dealers:

There might be a generic answer at some of these electronic surplus parts sources like Mouser or Hosfelt if ribbon conductor width and spacing can be matched.

Good Luck to you.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.