Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
9,529 Posts
You need to also take a close look at your battery cables. If there's any corrosion on them, odds are that there's also corrosion under the insulation. You could strip back about a 1/2" area and check it. If so, replace both the positive and ground cables. No point in doing a half-arsed job.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top