Allpar Forums banner
1 - 1 of 1 Posts

·
Super Moderator
1966 Crown Coupe, 2016 200 S AWD, 1962 Lark Daytona V8.
Joined
·
24,505 Posts
There could be hard crust and scale on the inside contact surface of the battery terminals. If it is bad enough, it can actually cause 'no connection'.
By jumping the battery on the outside of the battery terminals, you are bypassing the bad connection.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top