Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
385 Posts
I've even had corrosion occur between the cable copper strands and the battery terminal! Cleaned and shined everything but the test light revealed a bad link.

By using felt washers under the battery terminals and saturating everything with corrosion inhibitor my little '95 spirit's OEM battery terminals are like new. Bare terminals are asking for trouble.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top