Allpar Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
i had to change the head on my 01 cruiser now i can't get spark to the coil, i have checked the computer,checked all the grounds,and checked all the connections, i also changed crank and cam sensors and still nothing any more ideas?
 

·
Premium Member
Joined
·
20,349 Posts
Hi Paulie, welcome to the forum. check the power to the coil pack itself. If you have power there, you should have power out the coil.
 

·
Super Moderator
1966 Crown Coupe, 2016 200 S AWD, 1962 Lark Daytona V8.
Joined
·
24,252 Posts
I do remember that a couple of 3-wire black plastic connectors could be inadvertently swapped on certain years of these. Check that the cam sensor or TPS plug isn't swapped with the coil pack plug. See if they will reach and possibly plug into one another.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top