Allpar Forums banner
1 - 1 of 4 Posts

· Super Moderator
1966 Crown Coupe, 2016 200 S AWD, 1962 Lark Daytona V8.
Joined
·
17,568 Posts
If it happened during a jump start while the battery was failing or during a battery replacement, a voltage spike may have occurred and froze the logic of the thermometer. I would first try another battery disconnect, pause and reconnect to attempt a reset. Reset the clock.
-40°F is the default temperature when the 2-wire plastic ambient temp sensor (mounted under the front bumper and easily hit) is in open circuit.
 
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top