Allpar Forums banner

pushrod length question

1567 Views 1 Reply 2 Participants Last post by  dana44
Hello, everyone. I am wondering if anyone knows how the pushrod length of an '85 and up roller cam small block compares to the pushrod length in the earlier flat tappet motors. Are they the same length? or are the roller tappets taller, necessitating a shorter pushrod?

Thanks!
1 - 2 of 2 Posts
Sorry, don't know the exact answer, but, since the Magnum pushrods won't work with the LA engine, when you get the AMC V8 lifters to oil the rockers, being a conversion of sorts, the cam stores (Crane, Comp, etc.), know which ones you need to purchase.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top