Allpar Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I am currently working on a 1989 ram charger and have had countless problems finding parts such as wheel bearings and wheel cylinders I was wondering if anyone could help. The wheel bearings came from a 1 ton dodge and the truck is listed as a ram charger custom s.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
The front wheel bearings I had to order for a dodge 1 ton truck but the calipers and shocks were right for the front and when I ordered brake shoes for the rear they also were the correct size but the wheel cylinder I took off has the long push rods and deeper pistons than the new one but the outside is a perfect match it is the just the pistons I am going to the parts store today to see if I can match up the pistons because the 1 ton wheel cylinders are not right either. I'm not sure if the was done after market or direct from the factory as a part of the custom package but everything looks like it is original.

It has the 360 and is 4 wheel drive
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
Thank God for knowledgeable parts professionals that are willing to help you and kindly look over temporary lack of intelligence and suggest that you disconnect your brake line to relieve the pressure so that your pistons inside your wheel cylinder will come together like they are supposed to.
 
1 - 3 of 3 Posts
Top