Allpar Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
682 Posts
1. Get the 225 slant six. The 173 and 198 are just as bulletproof but the 225 really is a better engine for gen-purpose / performance buildups.

2. If it comes with Lean Burn ditch that ASAP. Seriously.
 

·
Registered
Joined
·
682 Posts
/6s make low-end power. If that's what your application requires, that's where you should go.
But it might be easier to find a Ram Miser and just swap the driveline. Is your frame / suspension / K-frame up to holding up that /6?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top