Allpar Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
653 Posts
Discussion Starter · #1 ·
:thumbsup:
I think i have a speed-sensor problem. Cars stalls,- but works now after i went over wiring.

I thougt og using another sensor from my automat , but now since i have swapped to manual trans i have also changed axles.
So what i think is; that my old sensor wont work, since number of teeth on axles are different-

Is this right?

I see they are prodused with some visual differenses.
 

·
Registered
Joined
·
653 Posts
Discussion Starter · #3 ·
My car is a turbo z 86. Analog dash.

No code is seen.

when the problem was there- speedometer still worked-

i quess i may have a week wire, impossible to find.

But as you say, the AIS motor is involved in this, at it may be some dirt og damage in the ais-motor. Sometimes rpm rises for no reason.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top