Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
2017 Ram 1500 3.6 Crew
Joined
·
7,009 Posts
I found your casting number for the head listed by one owner as a 230. Measure the length from the center of the trapazoidal cover on the right side to the front of the block. A 230 should be 11-7/8" and the 265 should be 13-1/32. If the carb is centered, it shpould also measure the same.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top