Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
842 Posts
Well, if it's like mine, there is a bolt that sticks out the back of the pump bracket. The other side of it bends 90 degrees and goes out the passenger side, then through another slotted hole. Then to tighten the pump, you just slightly loosen the two bolts that hold the pump on (on the side) and tighten the back bolt (which is always a pain to reach), then re-tighten the bolts at the side.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top