Allpar Forums banner
1 - 1 of 32 Posts

· Registered
878 Posts
The 80% ethanol can be very damaging to the fuel system of the car. There were HUGE problems here in the States with MTBE and methanol in the '90s. Ethanol isn't that corrosive, but it will damage the fuel system if used consistently.
I would advise finding a Chrysler dealer who can read the TCM codes for you. Here in the States, we have OBD-II as our standard vehicular diagnostic interface. I'm not sure what you use in France, but it probably will only be able to pull generic transmission trouble codes. Ours are the P0700 series of codes, but there are many more Chrysler-specific codes mentioned in the manual than OBD provides for.
1 - 1 of 32 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.