Allpar Forums banner
1 - 1 of 4 Posts

· Super Moderator
12,466 Posts
When you said flicker, I wasn't thinking that it dropped to zero. Very possible that you have a loose tachometer drive board. It's a daughter card that plugs into the main instrument circuit board with an edge card connector. These don't tolerate vibration well. Pull the instrument panel out and unplug the tach drive board, and re-seat it fully.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.