Allpar Forums banner
1 - 4 of 7 Posts

· Registered
Joined
·
84 Posts
Discussion Starter · #1 ·
The most recent problem on my 87 Sundance involves the tail lights.

With the running lights off, the rear brake and turn lamps work normally.

With the running lights and/or headlights on, I have the following problems:

  • The tail lamps all light up, except when I apply the brakes, in which case the right brake lamp goes out. The high brake light functions normally.
  • Turn signals remain solid (no flashing)

The back-up lamps and front running lights/turn lights are unaffected, though one of the backup lights is much brighter than the other, despite both having identical new bulbs installed.

Any thoughts on how to trouble-shoot this electrical gremlin? The fuses are all intact, and the bulbs are all the correct type.
 

· Registered
Joined
·
84 Posts
Discussion Starter · #6 ·
Ok, now my high brake lights are not turning on. I have replaced the bulbs and checked the wiring at the connectors and all seems well. All the fuses look good too. What is the next thing I shoulf check? All other lights are functioning correctly.
 
1 - 4 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top