Allpar Forums banner
1 - 1 of 18 Posts

· Registered
315 Posts
The stroker crank adds no size to the block! I'd for sure do the usual hot rod stuff, go to a 4.10 gear, put on an Airgap manifold and have some fun. 742 or 489 axles are not that hard to find, but you'll have to narrow the housing for the Dart. Finding an 8.25 might be difficult, but should hold the power well.
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.