Allpar Forums banner


1854 Views 1 Reply 2 Participants Last post by  Bob Lincoln
As I'm preparing to put my interior back in, I want to replace the old underlay that was along the firewall and under the carpet. The old stuff is already out, but what should I use to stick the new stuff down? That, or would using tar be enough for the firewall?
1 - 2 of 2 Posts
After treating with a good rustproofing paint, I'd spray some undercoating, and then before it dries fully, press the underlay in.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.