Allpar Forums banner

Valve cover bolt on today - curtain probl.

1526 6
Hei - today is the day for valvecover bolt on.

While cleaning i departed the small curtain inside cover ( 20 cm mounted with two bolts,-remember this is an 86)

I then noticed this thing was sealed with some kind of silicon. Now all silicon is removed, but i really dont want to put new seal on. I fear it will loosen and mix in oil.

Do i need this sealant? would a leak cause oil to flow throu tube and further on?

I know this is hard to tell but maybe someone has met the same problem........ :working:
1 - 4 of 4 Posts
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.