Allpar Forums banner

WANTED: Rear Disc Brakes

1733 2
I am in need of a set of rear disc brake mounting brackets; the casting that holds the caliper to the spindle and to which the dust shield is mounted.

Here they are removed (and painted orange). Any 2nd Gen (00-05) Neon with rear disc brakes would have the same brackets, even SRTs.



If you have a set, please let me know!

Thanks!
1 - 2 of 2 Posts

·
Registered
Joined
·
3,562 Posts
Discussion Starter · #3 ·
Thanks for the info! I already have all the ancillaries and have added ABS & TC via a PT Cruiser, but unfortunately the PT's backing plates, while using the same casting, use a different bolt circle to attach to the spindle.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top