Allpar Forums banner
1 - 2 of 2 Posts

·
Registered
2017 Ram 1500 3.6 Crew
Joined
·
6,996 Posts
I bet you are back feeding the starter relay. pull the small wires off the relay and see if one becomes hot when you turn on the ignition. it shouldnot be hot until the starter position is engaged. One should go to the clutch/neutral safety switch and the other is to turn on the relay. That wire has been somehow crossed. Look at the color coding and the area you messed with and that is probably where you will find it.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top