Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
226 Posts
I wouldn't use either place anymore. First they totally fleeced you. If they are rebuilding that much of your front suspension, there is no way you will require that much labor. Total cost of parts is maybe $1500 if sourced from Mopar. Doubt they sourced Mopar.
The nuts may not have been torqued before giving the vehicle back and the nut may have come off during driving. You torque down the suspension when it's on the ground. The lower ball joint can be difficult.
The alignment was a disaster if they claimed to have aligned the vehicle when the lower control arm was loose or not attached and they didn't notice.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top