Allpar Forums banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
33,522 Posts
There are two rubber bushings on the pivot bolt for the alternator, in the bracket, and they wear out and allow the alternator to be slightly misaligned. All it takes is 1/8" or less to make noise. These are still available for about $3.50 each. The dealers often don't realize that you can order them separately from the $200 bracket, but with the correct PN you can. It doesn't show up in their parts diagrams. Try Chrysler PN 4556175.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top