Allpar Forums banner
1 - 1 of 3 Posts

· Super Moderator
21,732 Posts
If I counted correctly it was 12, 22, 23, 24 and 55. I don't think any of those would account for no spark.
I can't tell which engine you have as the 3.3 indicates a coil pack and the coil indicates a 3.0. You won't have both.
if this is a 3.3 powered car and there is not spark,I'd look at the crank position sensor. They can fail with no error codes. The sensor requires a very specific depth when mounted and a new one uses a paper spacer to set the depth.
If it's a 3.0 car, I'd suspect the distributor.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.