Allpar Forums banner
1 - 1 of 1 Posts

Virginia Gentleman
16,180 Posts
Champion has been the OEM plug for a long time, but Chrysler has been using NKG's on the newer vehicles. Either one is fine.

Newer vehicles don't have "wires" anymore. They've gone to a coil-on-plug set up. That's what my '06 Ram (Hemi) has. Installed the same old Champions the last time I changed out the plugs.

On my Acclaims (long gone) I used Belden wires as Bob as - no problems. I used Autolite plugs with no issues as well.

Where people go wrong is using Bosch +4's, E3's, etc.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.