Allpar Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
22 Posts
Very common problem on the 2.7 is the upper radiator hose coolant bleeder assembly - it is plastic from the factory -poor design - had 3 blow apart on my 300 . Dorman came out with a metal one that works great ,highly recommend replacing your plastic one before you get stuck overheating in the middle of the night in the middle of no where
 

·
Registered
Joined
·
22 Posts
My 2009 300 with the 2.7 blew a head gasket at 109,000 miles. Fortunately it had a lifetime powertrain warranty.
Upon teardown they also found bad camshafts , cracked head and couldn't get parts and FCA instructed dealer to replace the engine with a new one !
 
1 - 2 of 2 Posts
Top